Search results

The Wyr-Grid® Overhead Cable Tray Bottom Waterfall is designed to maintain a 1.38in (35mm) bend radius while transitioning fiber optic, power, and copper data cables from within the Wyr-Grid® wire rack down into racks in cables. Waterfalls simply snap on

Category: Cable Tray Drop Outs

Used to carry the cables horizontally throughout the system. Accepts cable retainers FRCR12BL-X or hinged cover FRHC12BL6. Use QuikLock Coupler FRBC12X4BL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

The Wyr-Grid® Pathway Section protects cables between the Main Distribution Area and the Equipment Distribution Area. Unlike other pathways, it installs quickly and can be modified easily, optional sidewalls snap on without extra hardware or tools. Splice

Category: Straight Wire Basket

Used to carry cables horizontally throughout the system. Use QuikLock Coupler FRBC24X4YL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

End Cap Fitting For Use With LDPH10 and LD2P10 Raceway, White, ABS, Length 1.25 in.

Category: Cable Tray Ends

The FiberRunner® 6x4 Channel can be used with fittings and brackets to design a routing system to segregate, route, and protect fiber optic and high-performance copper cables. The cable routing channel accepts cable retainers or a hinged cover.

Category: Straight Channel Cable Tray

Used to fully enclose 12x4 channel in conjunction with the spill-over junction FRSPJ2X2YL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Straight Cable Tray Covers

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 24" (610mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 24" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB24BL bra

Category: Cable Tray Trapeze Hangers

The fiber mounting 2-piece ladder rack bracket attaches to either a 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or a 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. The bracket halves slide into position and clamp together on the ladder rack rail, which allows

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Used to support the 6x4 and 4x4 systems attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. Adjustable to nine incremental positions from 4" (101mm) to 12" (305mm) above or below the ladder rack. No threaded rod

Category: Cable Tray Mounting Hardware

Two-piece bracket attaches to 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. Bracket halves slide into position and clamp together on the ladder rack rail, which allows for a one-handed assembly of the threaded ro

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 18" (457mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 18" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB18BL bra

Category: Cable Tray Trapeze Hangers

StructuredGround™ Grounding Strip, 45RU, Threaded Rail

Category: Cable Tray Mounting Hardware

Cove raceway divider wall. Snaps onto rails in cove raceway base to create separate channels. Must use wire retainers to ensure channel separation per UL/CSA. Available in 8' lengths.

Category: Straight Cable Tray Covers

Cover coupler fittings. Used to join two pieces of cove raceway cover together.

Category: Straight Cable Tray Covers

Used to fully enclose 6x4 channel in conjunction with the Spill-Over Junction FRSPJ2X2OR. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Straight Cable Tray Covers