Search results

Dual Rated Turn Prevent Lug 300 MCM - 6 AWG Dual Rated Turn Prevent Lugs are made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. For use with both copper and aluminum conductors. Rated 600V (2000V max. per UL486B). UL 486A/B Listed. Temperature Rating 90 degrees C.

Category: 1-Conductor Aluminum Mechanical Lugs

3 Port Stacked Lug 600 MCM - 2 AWG Stacked Lugs are large size set screw connectors with wire holes stacked on top of each other to minimize the width of the connector. Made of 6061T-6 aluminum alloy. Tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Rated 600 volts (2000V max. per UL486B). UL486A/B Listed. Temperature rating 90 degrees C. Mounting hole spacing is NEMA standard of 1.38".

Category: Aluminum Panelboard Lugs

500 Mcm Cu Compression Lug, 1/2 Bolt Size

Category: 1-Hole Copper Compression Lugs

Copper Lay-in Lug with stainless steel screws for grounding or in continuous loop bonding. UL Listed for direct burial in earth or concrete with copper wire, 4-14AWG.

Category: 1-Conductor Bronze Mechanical Lugs

Copper Compression Lug, Conductor Size: 400 MCM, 2-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 2-Hole Long Barrel Copper Compression Lugs

1 HoleShort Barrel Copper Compression Lug w/ PeepHole2 AWG-3/8" Bolt Short Barrel Copper Compression Lugs with PeepHoleis a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: 1-Hole Copper Compression Lugs

NSI GL1048 1/0 AWG CU COMPRES

Category: 1-Hole Copper Compression Lugs

Dual Rated Turn Prevent Lug 2/0-14 AWG Dual Rated Turn Prevent Lugs are made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. For use with both copper and aluminum conductors. Rated 600V (2000V max. per UL486B). UL 486A/B Listed. Temperature Rating 90 degrees C.

Category: 1-Conductor Aluminum Mechanical Lugs

Parallel Tap Connector with Cover, Aluminum, Wire Size: Main - 2-12 STR, Tap - 4-14 STR, 600 Volt

Category: Aluminum Tap Lugs

500 Alum Compression Lug, 1/2 Bolt Size 2 Hole (al/cu)

Category: 2-Hole Aluminum Compression Lugs

1X350-6 LINE 6X2/0-14LOAD

Category: 2-Hole Long Barrel Aluminum Compression Lugs

Copper Compression Lug, Conductor Size: 250 MCM, 2-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 2-Hole Long Barrel Copper Compression Lugs

Dual Rated Aluminum Splice 4/0 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.

Category: Standard Barrel Aluminum Compression Sleeves

Copper Compression Lug, Conductor Size: 600 MCM, 2-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 2-Hole Long Barrel Copper Compression Lugs

Nsi Asc500t #500 Alum Compres sion Splice

Category: Standard Barrel Aluminum Compression Sleeves

1 HoleStandard BarrelAluminum Compression Lug2/0 AWG -3/8 Bolt Standard BarrelAluminum Compression Lugs is a type ofaluminum compression connector that is produced from high conductivityaluminum tubing.Center stop assures proper cable installation.They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: 1-Hole Aluminum Compression Lugs