Splice Kits - Low Voltage

Insulator Boot for MD-M & MD-F Series Disconnects, Size 3, 600kV, Thermoplastic Rubber

Category: Low Voltage Motor Lead Splice Kits

Easy-Splice Gel Stub Splice Kit with Connector, (Hole A) - 14-2/0 AWG - (Hole B) - 6-14 AWG, 1000 Volt, White

Category: Low Voltage Gel Filled Splice Kits

Splice Kit, Heat Shrink, 600V, Conductor Range: 14 - 8 AWG, Tubing Size: 1.1" x 18". For use with Aluminum or Copper Cable in Direct Burial Applications.

Category: Low Voltage Heat Shrink Splice Kits

Motor Connector Kit, Non-Shielded, Clear Cap, 8 - 2 AWG

Category: Low Voltage Motor Lead Splice Kits

IDEAL, Underground Splice Kit, Thermo-ShrinkÖ, Al/Cu Splice Kits, Cable Size: 1/0 AWG - 250 KCMIL, Voltage Rating: 600 V, Operating Temperature: 105 DEG C

Category: Low Voltage Heat Shrink Splice Kits

Stub Splice & Motor Connecor Kit, 8 - 2 AWG, Heat Shrink

Category: Low Voltage Motor Lead Splice Kits

GelCap Motor Connection Kit, 1000 Volt, Wire Range: 16 - 10 AWG, For Use Insulating, Sealing, and Protecting Stub Splice Connections up to 1000 Volt.

Category: Low Voltage Gel Filled Splice Kits

GelCap Motor Connection Kit, 1000 Volt, Wire Range: 250 - 500 MCM, For Use Insulating, Sealing, and Protecting Stub Splice Connections up to 1000 Volt

Category: Low Voltage Motor Lead Splice Kits

ALR CBR-6-1-A 6 LEG BREAKOUT BOOT

Category: Low Voltage Motor Lead Splice Kits

Low Voltage Splice Kit, 3 Conductor, 2-1/0 AWG, 600V, For Use With Armored Cable, 1 Per Case

Category: Low Voltage Cold Seal Splice Kits

UF SPLICE KIT FOR DIRECT BURIAL 14AWG TO 8AWG

Category: Low Voltage Direct Burial Splice Kits

Easy-Splice Gel Tap Splice Kit with Connector for #14 - 2/0 AWG The Easy-Splice gel tap splice kit provides a fast and simple method for connecting, insulating, and environmentally sealing low-voltage splices. The splice kit is designed for underground and overhead environments and is useful for street lighting applications. The splice kit's dual-rated mechanical connector splices a wide range of cables, including copper and aluminum. The connector's four port design allows maximum inventory flexibility. The sealant gel protects the connection from moisture ingress, corrosion and pollution. The hinged splice closure can be installed over the connector in seconds by simply snapping the cover shut. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C.

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Gel Tap Splice Kit with Connector for #14 - #2 AWG The Easy-Splice gel tap splice kit provides a fast and simple method for connecting, insulating, and environmentally sealing low-voltage splices. The splice kit is designed for underground and overhead environments and is useful for street lighting applications. The splice kit's dual-rated mechanical connector splices a wide range of cables, including copper and aluminum. The connector's four port design allows maximum inventory flexibility. The sealant gel protects the connection from moisture ingress, corrosion and pollution. The hinged splice closure can be installed over the connector in seconds by simply snapping the cover shut. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C.

Category: Low Voltage Gel Filled Splice Kits

Splice Kit, Direct Bury, 600V, Wire Range: 18 AWG to 10 AWG. Includes: (1) Splice Tube, (1) O and (1) B Connector. Color: Orange / Blue.

Category: Low Voltage Direct Burial Splice Kits

NSI ESGHS-N H-TAP GEL SPLICE

Category: Low Voltage Gel Filled Splice Kits

Replacement Heat Shrink Sleeves, Overall Length: 9.00", Cable Insulation Diameter Range: 0.80" - 1.75"

Category: Low Voltage Heat Shrink Splice Kits