Search results

Ac/Dc Voltage Tester Test Voltage At Four Levels: - Ac: 24V, 48V, 120V, 240V - Dc: 32V, 64V,160V, 330V • Test Lead Holders Spaced For Testing Tamper-Resistant Us-Style Outlets

Category: Voltage & Continuity Testers

KLEIN CL312 400A AC Digital H

Category: AC Clamp Meters

Tester, Coax Explorer Plus, Features: Tests 4 Locations Simultaneously, Includes: Remote Holder

Category: Voltage & Continuity Testers

The MM600 Is An Auto-Ranging Digital Multimeter That Measures AC/DC Voltage, AC/DC Current, & Resistance, It Also Measures Temperature, Capacitance, Frequency, Duty-Cycle, & Tests Diodes & Continuity

Category: Multimeters

Digital Multimeter Electrical Test Kit, Includes: MM320 Manual Ranging Digital Multimeter, NCVT-3P Dual Range Non-Contact Voltage Tester With Flashlight, ET45 AC/DC Voltage Tester, RT210 GFCI Receptacle Tester, Carrying Case, Instructions, and All Needed Batteries

Category: Multimeters

Dual IR/Probe Thermometer, Measures Surface Temperature -40 to 572°F (-40 to 300°C), Includes: Carrying Case with Belt Loop and 2 AAA Batteries

Category: Temperature Testers

KLE 69192 440MA REPLACEMENT

Category: Electrical Test Kit Carrying Cases

Digital Pocket Thermometer, Range -40 to 482 Degrees F (-40 to 250 Degrees C) With 0.1 Degree Resolution, 3-Inch Stainless Steel Probe With Protective Sheath That Also Acts as a Handle, Ambient and Direct-Contact Temperature Readings

Category: Temperature Testers

Digital Clamp Meter, AC Auto-Ranging, 400AClamp Meter, Maximum Rating: CAT III 400A AC/DC & 600V AC/DC, Features: True RMS, Amperage, Voltage, Frequency, Resistance, Diodes, Includes: Carrying Pouch, Test Leads, Thermocouple with Adapter and Batteries

Category: AC / DC Clamp Meters

Standard Banana-Type Inputs Compatible With Most Multimeters And Clamp Meters, Heavy-Duty Alligator Clips Attach To Wires And Other Conductors, Perfect For Insulation Resistance Testing, Includes 1-Pair of Universal Right-Angle Test Leads With Banana Plug To Heavy-Duty Alligator Clip, Leads Are 3-Foot (0.91 m) Long 18 AWG Double, Insulated Wire, CAT III 1000V/CAT IV 600V Safety Rating, Designed By Electricians, For Electricians

Category: Electrical Tester Clips

Cl220 Clamp Meter Measures Ac Current And Ac/Dc Voltage, Resistance, And Continuity Via Test Leads, And Temperature With Thermocouple, Auto-Ranging Trms Meter Has A Backlit Lcd On Clamp To Provide Better Viewing In Low Light And Is Cat Iii 600V, Class 2 Double Insulated, Ncvt3P Has Dual-Range Capabilities To Detect From 12 To 1000V Ac Or 70 To 1000V Ac For A Broad Variety Of Low-Voltage Or Standard Voltage Applications, Bright Flashlight Illuminates Work Area And May Be Used Independent Of Ncvt-3P Voltage Detection Function, Et40 Tests Ac Voltages From 12V To 240V And Dc Voltages From 1.5V To >17V To 24V At Four Useful Levels Aligned With Commonly Used Residential Voltages, Et40 Also Has Built-In Test Lead Holders Spaced For Testing Tamper-Resistant Us-Style Outlets And Convenient For Storage, Rt210 Detects Common Wiring Problems In Standard And Gfci Receptacles: Open Ground, Reverse Polarity, Open Hot, Open Neutral, And Hot/Ground Reversed

Category: Clamp Multimeters

DIGITAL CLAMP METER AC AUTO 400A

Category: AC Clamp Meters

Replacement Transmitter For the ET310 Circuit Breaker Finder with Integrated GFCI Outlet Tester, The ET310 Consists of Two Parts: a Transmitter Connected to the Electrical Outlet or Fixture, and a Receiver Used to Scan the Panel to Locate the Correct Breaker, The Transmitter Also Checks for Common Wiring Faults in North American Grounded Electrical Outlets, Transmitter Incorporates a GFCI Tester for Tripping GFCI Devices, The Transmitter May be Connected to Other Electrical Fixtures Using Optional Accessories Which are Sold Separately (Cat. No. 69411), Transmitter is Powered by the Circuit When Connected to the Electrical Outlet or Fixture; No Batteries Needed, CAT II 120V Safety Rating, Built to Withstand a 6.6-Foot (2 m) Drop

Category: Circuit Breaker Finders

KLEIN 69028 TEMP PROP

Category: Electrical Tester Accessories

Cable Length Meter Measures Length of Electrical, Data, Two-Wire and NM-B® Cables Up to 3000 Feet (914 m), TDR Technology Measures Distance-to-Fault, Open or Short, on Terminated or Unterminated Cable, Programmed With Velocity of Propagation (VoP) Values for Coax, Data, NM-B® and Other Multiwire Cables for Accurate Length Measurement Within +/-(2-Percent Plus 3-Foot/0.9 m) Accuracy, Stores Custom Cable VoP Values for Consistently Accurate Results and Time Savings, Simple Interface With Full Color, Interactive LCD, Tones Unenergized, Open-Ended Wires For Wire Tracing (Requires Analog Probe (Cat. No. VDV500-123, Sold Separately), Coax-BNC or High Quality Alligator Clips for Quick, Easy Connection to Test Most Cable Types, RJ45 Jack for Accurate Length Measurement of Terminated Data Cables, Measurements Can be Switched Between and Metric and Imperial Units, Includes (2) AA Batteries, Padded Carrying Case and Leads

Category: Cable Length Meters

Standard Banana-Type Inputs Attach to the Meter and the AC Plug Connects to Circuit for Measuring or Tracing a Circuit, Cable Length is 2-Foot (61 cm) Long For Use on North American 120V Electrical Outlets Only, Safety Rated: CAT III 1000V/CAT IV 600V Safety Rating, Double Insulated, Test Cable is PVC Insulated 18 AWG Dual Wires, For Use With the Advanced Circuit Tracer Kit (Cat. No. ET450) or Any Brand of Meter With Banana-Type Connectors

Category: Test Lead Sets