Search results

Junction Box, NEMA 4X, Hinge Cover, 16 x 14 x 6 Inch, Stainless Steel

Category: NEMA 4 Wall Mount Enclosures

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

KL Terminal Box, Sheet Steel Without Mounting Plate with Cover Without Gland Plate, NEMA 4, IP66, Dimensions: W: 11.81", H: 5.91, D: 3.15"

Category: NEMA 4 Wall Mount Enclosures

Housing with door of sheet steel, spray-finished with mounting plate and flange (gland) plate in the base. Protection category up to IP 66.

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Hinge Cover, NEMA 4, 59.06 x 35.43 x 15.75 Inch, Carbon Steel/Zinc Plated

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Hinge Cover With 3-Point Latch, NEMA 4, 47(H) x 35(W) x 16(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

Junction Box With Hinge Cover, NEMA 4, 14 x 12 x 6 Inch, Carbon Steel/Gray Finish

Category: NEMA 4 Wall Mount Enclosures

KL Terminal Box With Cover, 5.9 x 5.9 x 4.7 Inch, NEMA 4, Carbon Steel/Gray Finish

Category: NEMA 4 Wall Mount Enclosures

Wall-Mount Disconnect Enclosure, Hinge Cover, 48 x 38 x 12 Inch, Carbon Steel

Category: NEMA 4 Wall Mount Enclosures

Junction Box, NEMA 4X, Hinge Cover, 6 x 6 x 6 Inch, Stainless Steel

Category: NEMA 4 Wall Mount Enclosures

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

0760H0760W0300D AE RAL7035

Category: NEMA 4 Wall Mount Enclosures

Terminal boxes JB, Sheet steel, material: Enclosure and door: Sheet steel, all-round foamed-in PU seal, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, color: RAL 7035, supply includes: 180¦ hinge, Enclosure with door, Mounting plate, description: The JB enclosure offers protection for dense wiring and sensitive small instruments. These hinged cover junction boxes combine the advantages of the AE and KL series at an economical cost. Features include 180 degree hinge and slotted insert quarter turn latch. Foamed-in-place gasket and a knife-edge perimeter add extra protection.

Category: NEMA 4 Wall Mount Enclosures

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latch, NEMA 4, 30(H) x 20(W) x 8.3(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures