Search results

4" Diameter, Old Work Ceiling/Fixture Box with Speed Clamps, Surface Mount, Non-Metallic, Depth: 1-5/8", Cubic Inches: 16.0, Fixture Weight: 50lbs, Fan Rating, 35lbs. Includeds: Mounting Hardware.

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

Double Gang, Screw Mount Steel Stud Box with Captive Combo Head Self-Tapping Mount Screws on Each End. Four Auto/Clamps on Each End. 50 pack.

Category: Non-Metallic New Work Switch / Outlet Boxes

Switch/Outlet Box, 1-Gang, Depth: 2-1/2 Inch, Cubic Inches; 14, Ear Brackets, Wing Brackets, Non-Metallic, Clamps, Non-Metallic

Category: Non-Metallic Old Work Switch / Outlet Boxes

Switch/Outlet Box with Offset Bracket, Depth: 3 inch, 2-Gang, Cubic Inches: 32.5, 1-1/4 InchSpeed Klamps, Non-Metallic

Category: Non-Metallic Switch / Outlet Boxes With Brackets

37.0 Cu. In. two gang electrical box for use with nonmeatllic sheathed cable - Machine tapped device holes, slot provision for low voltage divider, offset gauge marks, leveling ribs, rigid hard box construction, no distortion with high temperatures, shatter resistant with low temperatures - New work residential construction 2 HR fire resistive walls - Fiberglass reinforced polyester - thermoset box - Size:D=3 7/16", W=4", H=3 3/4" - Mount with Angled mid nails - Speed KlampsÖ bulk packed *** Discontinued ***

Category: Non-Metallic New Work Switch / Outlet Boxes

4 Inch Round Outlet Box, With Adjustable Bar Hanger Mount, Depth 2-7/16 Inch, Cubic Inches 22.5, NM Cable Clamps, Fixture Rating 50 Pound, Thermoset-Fiberglass

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

Box Extender, 1-Gang, Non-Metallic. Color: White. Depth: 1-1/2" with a slightly larger flange that covers miscut wall material and accommodates midi or maxi cover plates.

Category: Non-Metallic Box Extenders

1-Gang, Nail-On, Switch/Outlet Box, Phenolic, Depth: 3-1/8". Cubic Inches: 18.0". New Fire Rating. Carlon phenolic boxes can be installed in the same stud cavity of a shared two-hour wall. They may also face opposite directions with only a 3" horizontal separation.

Category: Non-Metallic New Work Switch / Outlet Boxes

Electrical Box, 1-Gang, For Use with Non-Metallic Sheathed Cable, Depth: 2". Cubic Inches: 12.8"

Category: Non-Metallic Surface Mount Switch / Outlet Boxes

4 Inch Round Ceiling Box With Adjustable Bar Hanger, Adjusts 16 to 24 Inch, Non-Metallic

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

18.0 Cu. In. Single gang electrical box for use with nonmeatllic sheathed cable - Molded-in spline device holes, rectangular exterior for easy cut-in - Old work residential construction 2 HR fire resistive walls - PVC - Thermoplastic - Size: D=3", W=2 1/4", H=3 11/16" - Mount with Metal wing brackets/nonmetal ears wall compression

Category: Non-Metallic Old Work Switch / Outlet Boxes

Switch/Outlet Box, 2-Gang, Depth: 3-7/16 Inch, Cubic Inches: 37, Nail-On, Vapor-Seal, Angled Mid-Nails, Speed Klamps Factory Installed, Non-Metallic

Category: Non-Metallic New Work Switch / Outlet Boxes

4 Inch Square Box Device Ring, 1-Gang, 3/8 Inch Raised, Cubic Inches: 3.2, Non-Metallic

Category: Non-Metallic Plaster Rings

74.8 Cu. In. Four gang electrical box for use with nonmeatllic sheathed cable - Molded-in splined device holes, leveling ribs - New work residential construction - Polycarbonate - Thermoplastic - Size: D=3 1/4", W=7 5/8", H=3 3/4" - Mount with Stud face mount steel hanger bracket with 1/2" offset and opposite side drywall tabs

Category: Non-Metallic Switch / Outlet Boxes With Brackets

Switch/Outlet Box, 2-Gang, 3 Inch, 35 Cubic Inches, (4) Auto/Clamps with Quick Entries, Non-Metallic

Category: Non-Metallic New Work Switch / Outlet Boxes

4" Diameter, Adjustable, 4/0 Ceiling/Fixture Box, Non-Metallic, Depth: 2-3/4". Cubic Inches: 26". Knockouts: (2) 1/2". Fan Weight: 70 lbs. Fixture Weight: 90 lbs. Paddle Fan Rated

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes