Search results

3M™ Direct Bury Splice Kits combine the quick, reliable connection of a 3M™ Performance Plus™ Wire Connector with the moisture resistance of a high impact, UV resistant tube prefilled with moisture resistant grease. It is UL Listed for 600 volts in direct bury applications.

Category: Low Voltage Direct Burial Splice Kits

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 1/0 AWG - 250 MCM, Motor Lead Range: #2 AWG - 250 MCM. Voltage Range: 5/8kV, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Scotchcast™ Inline Resin Power Cable Splice Kit 82-A2N, 2-3/0 AWG, 1 Per box, 10 Per Case

Category: Non-Shielded Resin Splices

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 14 AWG - 10 AWG, Motor Lead Range: 16 AWG - 12 AWG. Voltage Range: 1000V, Connection Type: 1-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Insulating Resin, Material: Two-Part Polybutadiene, 12.3 Ounces, For Use in Sealing/Insulating/Mechanical Protection

Category: Insulating & Sealing Compound

Low Voltage Splice Kit, 3 Conductor, 2-1/0 AWG, 600V, For Use With Armored Cable, 1 Per Case

Category: Low Voltage Cold Seal Splice Kits

Resin Splice Kit, Multi-Mold, 600V, Maximum Conductor: 8 AWG (Split Bolt), 4 AWG (H & C Tap Compression). Kit Includes: Mold Body, Sealing Mastic, Scotchcast Resin 4 and Adhesive Film Strip.

Category: Non-Shielded Resin Splices

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 2 AWG - 1/0 AWG, Motor Lead Range: 4 AWG - 1/0 AWG. Voltage Range: 5kV or 8.7 kV, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 8 AWG - 4 AWG, Motor Lead Range: 10 AWG - 4 AWG. Voltage Range: 1000V, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 8 AWG - 4 AWG, Motor Lead Range: 10 AWG - 4 AWG. Voltage Range: 5kV or 8.7 kV, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

3M 5451-CI-1/0A MOLDED RUBBE

Category: Medium Voltage Cold Shrink Splice Kits

Re-Enterable Insulating & Sealing Compound, Size D, 21.2 Ounce, 40.6 Cubic Inches. For Use After Re-Entering

Category: Insulating & Sealing Compound

3M™ Cold Shrink Shielded Splice Kit 5550 Series are for splicing 5 kV and 8 kV shielded, solid dielectric, power cables. Meets requirements of IEEE 404. Each kit contains all the materials (except connectors and optional ground strap) required to construct three (3) single conductor splices on Tape Shield, Wire Shield or UniShield® cables. Note: The kit can also be used to splice a shielded to a non-shielded 5/8 kV cable. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Category: Medium Voltage Cold Shrink Splice Kits

Motor Lead Pigtail for Shielded Cable, 250 - 500 MCM Feeder, 4/0 - 500 Motor Lead

Category: Medium Voltage Motor Lead Splice Kits

Splice Kit, Cold Shrink, 15 kV, Works with Various Types of Shielded Cables, Conductor Range: 2 AWG - 4/0 AWG. Cable Insulation Range Size: 0.64" - 1.01". Connector Requirements: Minimum O.D.: 0.40", Maximum O.D.: 1.06", Maximum Length: AL/CU 4.5", Copper 5".

Category: Medium Voltage Cold Shrink Splice Kits

3MÖ ScotchcastÖ Electrical Insulating and Sealing Compound 2104 is a 2 part, liquid type, semi flexible resin useful for providing permanent splice protection. This polyurethane resin has a good wetting and impregnating property, which makes it easy to infuse on any surface. It is useful for applications that include filling, potting, sealing, insulating and more.

Category: Insulating & Sealing Compound